E-flite EFL7150 Manuál s instrukcemi stáhnout pdf (Strana 6)

Model Assembly

Landing Gear Installation

1. Install the landing gear strut (A) with the wheels raked forward as shown.

2. Install the cover (B) on the fuselage using 4 screws (C).

Disassemble in reverse order.

Horizontal Tail Installation

1. Slide the horizontal tail tube (A) into the hole in the rear of the fuselage.

2. Install the 2 piece (left and right) horizontal tail as shown. Ensure the con-

trol horn faces down.

3. Connect the LED connectors to either side of the LED light harness in the

fuselage.

4. Apply 8 pieces of tape (B) to the fuselage mounts (two on the top and

bottom of each half of the horizontal tail).

5. Attach the clevis to the elevator control horn (see instructions for clevis

connection).

6. When needed, disassemble in reverse order.

1 2 3 4 5 6 7 8 9 10 11 ... 21 22

Žádné komentáře

E-flite EFL7150 Manuál s instrukcemi Strana 6