E-flite EFL1275 Manuál s instrukcemi stáhnout pdf (Strana 4)

Model Assembly

Horizontal Tail Installation

1. Slide the horizontal tail tube (A) into the hole in the rear of the fuselage.

2. Install the 2 piece (left and right) horizontal tail as shown. Ensure the con-

trol horn faces down.

3. Install 2 screws (B) to secure the horizontal tail into place.

4. Attach the clevis to the elevator control horn (see instructions for clevis

connection).

5. When needed, disassemble in reverse order.

3mm X 10mm

Preﬂ ight

1 Remove and inspect contents.

2 Read this instruction manual thoroughly.

3 Charge ﬂ ight battery.

4 Fully assemble airplane.

5 Install the ﬂ ight battery in the aircraft (once it has been fully charged).

6 Check the Center of Gravity (CG).

7 Bind aircraft to your transmitter.

8 Make sure linkages move freely.

9 Perform the Control Direction Test with the transmitter.

10 Perform the AS3X Control Direction Test with the aircraft.

11 Adjust ﬂ ight controls and transmitter.

12 Perform a radio system Range Test.

13 Find a safe open area to ﬂ y.

14 Plan ﬂ ight for ﬂ ying ﬁ eld conditions.

1 2 3 4 5 6 7 8 9 ... 16 17

Žádné komentáře

E-flite EFL1275 Manuál s instrukcemi Strana 4